Dedicated in Solids Control Since 1987 sales@trsolidscontrol.com +86-13186019379 中文

Drilling Mud Desander

ProductId:Drilling Fluids Desander

TR Solids control is an designed,selling of drilling mud cleaner manufacturer. Tr provide desander picture and desander cyclone picture.

+86-13186019379 +86-29-86332919 sales@trsolidscontrol.com
INTRODUCTION

Drilling Mud Desander also called Desander. It is composed of hydraulic desander  cyclone,shale shaker and cyclone pipe. Desander uses centrifugal force to separate. Drilling Mud Desander uses centrifugal pump to supply mud, then the mud flow into desander cyclone along tangent of cyclone, and the mud’s structure was destroyed under the action of centrifugal force. Under the action of gravity, solid particles along the inner wall sink spirally and was discharged from the bottom of desander cyclone then falls on the following shale shaker, liquid was discharged from the top of the cyclone.

BENEFITS

1.Long life.

2.Small separation point

3.Less blockage
Desander cyclone uses high chromium cast iron or pure polyurethane material, customers can choose independently. We can exchange it with an international brand.

High separation ability and wide separation range. It can remove solid particles from 45 um to 1mm.

Cyclone underflow is pressurized umbrella “wet bottom” to quickly discharge the particles in the separation zone, reducing the blocking probability.

SPECIFICATION

Desander Technical Parameters

Model

TRCS200-1S/2S

TRCS250-2S

TRCS300-1S/2S

Capacity

60 / 120m³/h

120 / 240m³/h

140 / 280m³/h

Cyclone Specs

8inDN200)

10inDN250)

12inDN300)

Cyclone Qty

1nos / 2nos

1nos / 2nos

1nos / 2nos

Working Pressure

0.25-0.4mPa

0.25-0.4mPa

0.25-0.4mPa

Inlet Size

DN125mm

DN150mm

DN150mm

Outlet Size

DN150mm

DN200mm

DN200mm

Separation

45um-75um

45um-75um

45um-75um

Bottom shaker

TRTS60

TRTS60

TRZS752

Dimension

1510X1160X2000

1510X1360X2250

1835X1230X1810

Weight

570kg / 620kg

670kg / 760kg

1380kg

GALLERY

Desander for drilling fluids solids control

Desander is the third phase solids control equipment in the drilling fluids recycling system, separating the solids in 47-76μm from the drilling fluid.In the drilling solids control system used in the front of desilter and behind of shale shaker.

Desander Used in the removal of pile foundation engineering and slurry balance shield

TR solids control manufacture the desander which could replace the derrick and swaco.

We are an  drilling fluid desander manufacturer.Our factory approval the API,desander have the API certification.TR solids control is the designed,selling,production,service and delivery of Chinese drilling mud desander manufacturer. We will provide the high quality desander and best service.Your best desander start from TR solids control.

desander,drilling Mud desander,mud desanderchina desander,desander cyclone,desander manufacturer

TR WeChat

Company:TR Solids Control

Add:10 West The North Second Ring WeiYang,Xi'an,China

Factory Address: No.68 Caotang Industry Zone Huxian County Xi'an City 

Call:13186019379

E-mail:sales@trsolidscontrol.com

Web:www.chinasolidscontrol.com

© 2016 TR Solids Control Corporation. All rights reserved. TR Solids Control and its products indicated by trademark symbols are trademarks and/or registered trademarks of TR Solids Control Corporation.

Contact Us

TEL:+86-29-86332919

CALL:+86-13186019379

SKYPE

Skype:

Skype:

What’s App

  • 13186019379
  • 18509252400

Contact Us

TEL:+86-29-86332919

CALL:+86-13186019379

SKYPE

Skype:

Skype:

What’s App

13186019379

18509252400